Serving the Cincinnati area  ·  (513) 650-6986  ·  Open Mon-Sun 7am-7pm
📞 (513) 650-6986 Free Quote

Metal Roofing in Lebanon, OH (45036) · Local Professionals

Cincinnati Metal Roofing · Fast response in Lebanon and the Cincinnati area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+301Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lebanon still has that small-city feel where brick storefronts on Broadway meet farm fields just a few blocks east. The housing stock tells the story: 1800s and early 1900s homes near the historic downtown square, mid-century ranches along Route 42, and newer subdivisions off State Route 48 and near the Lebanon Sports Park. Lots range from tight in-town parcels to larger farm-edge properties with outbuildings, and the ground moves from flat to gently rolling as you head toward the Little Miami River bottoms.

Homeowners in 45036 call us because we understand that mix. We have repaired barn metal on a property off Township Line Road and installed standing seam on a porch roof in the historic district, and we know when a simple re-fastening will outlast a full replacement. If you are near the Golden Lamb or out past the Warren County Fairgrounds, we can get to you.

Metal Roofing in Lebanon (45036)

Lebanon sits in Warren County where clay soils and limestone bedrock meet, and that matters for roof drainage and fastener performance. Older in-town homes often have steep gables and small dormers, which means tight flashing details around chimneys and sidewalls. Farm-edge properties frequently have pole barns, garages, and sheds with corrugated or ribbed panels that take a beating from falling limbs and wind. We see a lot of screw back-out and washer deterioration on those outbuildings, plus ice damming at the eaves on older homes with minimal insulation. Newer subdivisions near the county fairgrounds have HOA design standards, so panel profile and color need to be checked before we order material.

Our team has worked across Lebanon and the surrounding Cincinnati area for years. We know the difference between a historic district review and a standard permit, and we plan access around narrow downtown alleys and long farm driveways. Whether it is a metal roof over shingles on a ranch or a full standing seam replacement on a two-story brick home, we handle the details that keep water out and the roof quiet.

Our services in Lebanon

How a Job Works in Lebanon

Step 1: You call (513) 650-6986 or request a free estimate online. We schedule an on-site assessment at your Lebanon property, usually within a few days. We inspect the roof, attic, flashing, and drainage, and we take photos so you can see exactly what we see. If it is an insurance claim situation, we document the damage and provide a written scope, but we never promise coverage or suggest a deductible can be waived.

Step 2: Once you approve the estimate, we pull the required permit through the City of Lebanon or Warren County as applicable, and we coordinate any historic district or HOA review. Material delivery is scheduled around your driveway and lot access. On tight in-town lots we use smaller delivery trucks and plan for dumpster placement so we do not block neighbors. Farm properties get a staging plan that keeps equipment off septic fields and away from livestock areas.

Step 3: After installation or repair, we magnet-sweep the yard and driveway for nails, remove all debris, and walk the roof with you. We do not leave until you have seen the finished work and understand the warranty and maintenance steps. Our team treats your property like a neighbor's, because in Lebanon we often are.

Pricing in Lebanon depends on roof size, access, existing layers, and condition. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal over shingles at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, which is often the right fit for barns and outbuildings. Metal roof repair and leak repair start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. These are starting figures, not final quotes. The biggest cost factors are roof square footage, pitch and access, number of penetrations, whether we are removing existing layers, and how soon you need us. Call (513) 650-6986 for a free, no-pressure estimate specific to your Lebanon property.

My barn off Township Line Road has corrugated panels with screws backing out. Can you re-fasten without replacing the whole roof?
Yes, in many cases. We inspect the panels for rust-through and enlarged holes. If the metal is still sound, we replace the screws with larger, neoprene-washered fasteners and reseal the penetrations. If panels are too far gone, we will tell you honestly and quote a partial or full replacement. Screw replacement and re-fastening starts at $750.
A storm just peeled back panels on my roof near the Warren County Fairgrounds. How fast can you respond?
We prioritize active leaks and storm damage in Lebanon. Call (513) 650-6986 and we will schedule a free inspection, usually within 24 to 48 hours for emergencies. We can tarp or secure the area to prevent further water intrusion and provide a written repair estimate.
What does a typical metal roof repair cost in Lebanon, and what makes the price go up?
Most repairs start at $450. The price rises with roof height and pitch, the number of leaks or damaged areas, whether flashing or penetration repairs are needed, and if the repair is in a hard-to-access spot like a steep gable over a historic downtown home. We give you a firm quote after inspection.
Do I need a permit for a metal roof in Lebanon, and does the historic district affect my project?
A permit is commonly required for a full replacement or re-roof in Lebanon and Warren County, and the threshold and fees vary. If your home is in the historic district, design review may restrict panel profile and color. We handle the permit application and coordinate with the city, and we always defer to the local building department for final rules.
My HOA in a Lebanon subdivision requires approval for roof color. Can you help with that?
Yes. We provide product samples, manufacturer color chips, and specification sheets you can submit to your HOA. We have worked with several HOAs around Lebanon and can adjust the panel profile or color to meet the architectural standards. We will not order material until you have written approval.
Are you fully insured for work on my Lebanon property?
Yes. We carry general liability insurance and workers' compensation coverage.
What maintenance should I do on my metal roof in Lebanon to prevent ice dams and leaks?
Keep gutters and downspouts clear of leaves from the sugar maples and oaks common here. Check the attic for proper insulation and ventilation to reduce ice damming at the eaves. Twice a year, look for loose screws or lifted panels, especially after windstorms. We offer free roof inspections and can apply a protective coating to extend the life of older panels.
Why choose us?

Trusted professionals in Cincinnati

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Cincinnati

All your work handled by qualified professionals in Cincinnati

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

301+ Verified Client Reviews in Cincinnati

⭐⭐⭐⭐⭐ 4.9/5 · 301 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Cincinnati · Response within 24h · No commitment · ☎ (513) 650-6986

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Cincinnati ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm