Licensed & Insured, in Cincinnati and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Cincinnati
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (513) 650-6986 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Cincinnati and surrounding areas · On-site visits included · Free estimate within 24h
Cincinnati Metal Roofing is a team of local certified professionals based in Cincinnati. We respond quickly in Cincinnati and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (513) 650-6986⭐⭐⭐⭐⭐ 4.9/5 · 301 verified Google reviews
“Had them put a metal roof on the wood-framed shelter we built in the backyard. The crew of three knocked it out in a single day and the panels line up perfectly. Cleaned up every last screw and scrap before they left.”
Metal Roof Installation
“The porch roof over our front entry was old and leaking onto the brick steps. They tore it off, fixed the flashing where it meets the brick wall, and had a new standing seam panel up in two days. No more drips, and the trim work looks sharp.”
Metal Roof Replacement
“We needed the roof on our hay barn redone before the season hit, and they came through fast. Corrugated panels, about 2,400 square feet, done in three days with zero leaks so far. Solid outfit.”
Commercial & Agricultural Metal Roofing
“Got a standing seam roof installed on the house and honestly it's the best money we've spent on the place. Crew was professional, explained everything, and the finished roof looks incredible. They even walked me through the snow guards they added.”
Standing Seam Metal Roofing
“Had a leak where the chimney meets our flat terrace roof. They re-did the flashing and sealed it up properly. Took a little longer than quoted and communication could've been better, but the leak is gone and the price was fair.”
Chimney & Skylight Repair
“We went with the retrofit over our existing shingles instead of a full tear-off, and I'm glad we did. Gray standing seam, saved us a ton of money and the house looks completely updated. Neighbors keep asking who did it.”
Metal Roof Over Shingles (Retrofit)
“The metal shingle roof on our brick house was showing its age and a few panels were loose. They re-fastened everything, replaced the bad screws, and repaired some flashing around a skylight. Looks brand new again.”
Metal Shingle Roofing
“Called them out for an inspection on the Tudor-style house we just bought since we weren't sure about the roof's condition. They found a few loose fasteners and some worn out flashing, gave me a clear written report, and didn't try to upsell me on anything. Honest folks.”
Metal Roof InspectionReal photos of our work in Cincinnati · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation | Starting at $8/sq ft | Includes tear-off, underlayment, flashing and concealed-fastener panels; pitch and panel gauge move the rate |
| Exposed fastener panel installation | Starting at $6/sq ft | Corrugated or ribbed panels with visible screws; roof size and number of penetrations affect the price |
| Metal shingle or stone-coated steel installation | Starting at $9/sq ft | Stamped or textured panels with full underlayment; historic district review can add design time |
| Complex or large-scale installation | On estimate | Steep gables, multiple chimneys, dormers or deck repair need an on-site look before pricing |
| Travel | Included | In Cincinnati and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (513) 650-6986, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam | Starting at $10/sq ft | Includes panels, concealed clips, underlayment, and standard flashing on a simple roof with normal access. |
| Mechanically seamed standing seam | Starting at $13/sq ft | Includes on-site seaming, heavier gauge panels, and premium flashing for steep or high-wind exposures. |
| Complex roof with dormers and valleys | On estimate | Cut-up roof planes, multiple valleys, and chimney flashing need an on-site look before pricing. |
| Hillside or tight-access property | On estimate | Narrow lots and retaining walls in Mount Adams or Price Hill add staging and material handling labor. |
| Travel | Included | In Cincinnati and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (513) 650-6986, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off and replacement, standing seam | Starting at $9/sq ft | Includes tear-off, haul-away, deck inspection, underlayment, flashing, and concealed-fastener panels; pitch and access move the price. |
| Full tear-off and replacement, exposed-fastener panel | Starting at $8/sq ft | Includes tear-off, deck repair, underlayment, and corrugated or ribbed panels; roof complexity and number of layers move the price. |
| Full tear-off and replacement, metal shingle or stone-coated steel | Starting at $11/sq ft | Includes tear-off, deck repair, underlayment, and shingle-profile panels; historic-district profile requirements can add cost. |
| Copper or specialty metal accents during replacement | On estimate | Bay, porch, and dormer accents priced after an on-site look at access, pitch, and detail work. |
| Travel | Included | In Cincinnati and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (513) 650-6986, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one layer of shingles | Starting at $7/sq ft | Includes slip sheet, eave and rake trim, and labor on a sound single-layer deck |
| Standing seam retrofit | Starting at $11/sq ft | Concealed fasteners and premium trim, priced higher on steep or tall hillside roofs |
| Exposed fastener panel retrofit | Starting at $8/sq ft | Corrugated or ribbed panels, the value option for ranches and outbuildings |
| Deck repair and sheathing replacement | On estimate | Quoted after inspection because soft decking only shows once we open it up |
| Estimate and deck inspection | Free | Response within 24h at (513) 650-6986, with no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (fasteners, seam, small flashing) | Starting at $450 | Covers a small job with a handful of fasteners or one resealed seam on an accessible roof. |
| Panel replacement (single run) | Starting at $850 | Replaces one dented or punctured panel, matching profile and color; steep pitch adds cost. |
| Chimney or skylight flashing rebuild | Starting at $1,200 | Includes flashing rebuild and re-seal; masonry chimneys and steep gables move the price up. |
| Storm damage repair (multiple areas) | On estimate | Hail or wind damage across several slopes needs an on-site look and written scope before pricing. |
| Travel | Included | in Cincinnati and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (513) 650-6986, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak point repair | Starting at $450 | Covers diagnosis, one failed fastener cluster or pipe boot, and a water test to confirm. |
| Flashing repair | Starting at $650 | Reseal or rebuild step, counter, or apron flashing at a wall or chimney transition. |
| Multiple leak points | Starting at $850 | Two or more separate entry points, common after hail or wind on exposed-fastener panels. |
| Emergency tarping | Starting at $350 | Temporary weatherproofing after storm or ice damage, credited toward the permanent repair. |
| Complex or large-scale job | On estimate | Widespread seam failure or panel damage needs an on-site look before we quote a number. |
| Estimate | Free | Response within 24 hours at (513) 650-6986, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot screw and washer replacement | Starting at $750 | Covers failed fasteners on a single roof plane, with written fastener count and UV-resistant washers. |
| Full-plane washer replacement | Starting at $1,450 | New washers on every screw across one panel field, priced by square footage and roof pitch. |
| Whole-roof re-fastening | Starting at $2,400 | Full exposed-fastener roof with oversized screws where holes are elongated, priced by panel count. |
| Steep or hillside access | On estimate | Mount Adams and Clifton lots with tight staging and steep gables need an on-site look before pricing. |
| Travel | Included | In Cincinnati and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (513) 650-6986, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Garage or outbuilding panel roof | Starting at $5.50/sq ft | Includes panels, screws, closures and basic flashing; price rises with steep pitch or tear-off |
| Residential R-panel or 5V roof | Starting at $6.50/sq ft | Includes underlayment, panels, ridge and eave closures; access and roof complexity move the number |
| Retrofit over existing shingles | Starting at $6.00/sq ft | Panels over a sound single shingle layer; deck condition and code limits affect feasibility |
| Full tear-off and re-roof | Starting at $8.00/sq ft | Old roof removed, deck inspected and repaired, new panels installed; multiple layers cost more |
| Complex or large-scale job | On estimate | Steep gables, dormers, historic district review or heavy penetration count need an on-site look |
| Estimate | Free | Response within 24h at (513) 650-6986, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, full tear-off and install | Starting at $9/sq ft | Includes tear-off, underlayment, ice shield, flashing and panels; pitch and deck condition move the price. |
| Metal shingle over existing shingles | Starting at $7/sq ft | Retrofit over one sound layer with slip sheet; code limits the number of existing layers allowed. |
| Slate-look or shake-look profile | Starting at $12/sq ft | Premium stamped profile and finish; roof complexity and valley count drive the final figure. |
| Porch, bay or addition only | On estimate | Tying new panels into existing roof and flashing needs an on-site look before a number is given. |
| Travel | Included | In Cincinnati and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (513) 650-6986, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof installation | Starting at $9/sq ft | Includes panels, underlayment, and standard flashing; pitch and roof complexity move the price. |
| Retrofit over existing shingles | Starting at $8/sq ft | Installed over a sound single-layer roof within code limits, with ventilation and flashing plan. |
| Full tear-off and replacement | Starting at $11/sq ft | Includes tear-off, deck inspection, sheathing repair, and complete new stone-coated steel system. |
| Storm or hail panel repair | On estimate | Scope depends on panel count, flashing damage, and whether insurance documentation is needed. |
| Travel | Included | In Cincinnati and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (513) 650-6986, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (bay window, porch, dormer) | Starting at $20/sq ft | Includes custom-formed copper pans and basic flashing; price rises with roof pitch and access difficulty. |
| Zinc or aluminum accent roof | Starting at $18/sq ft | Includes panels and standard trim; cost moves with panel profile and number of penetrations. |
| Full copper architectural roof | On estimate | Requires an on-site look at roof area, pitch, historic profile, and staging before a number is given. |
| Custom flashing and trim fabrication | On estimate | Priced by linear foot and complexity; chimney caps and valleys vary widely by house. |
| Travel | Included | In Cincinnati and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (513) 650-6986, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-story panel roof coating | Starting at $2.50/sq ft | Includes wash, rust spot treatment, primer and topcoat on a straightforward roof with good access. |
| Two-story or steep-pitch coating | Starting at $3.25/sq ft | Adds staging and fall protection for steep gables and hillside lots common in Hyde Park and Mount Adams. |
| Rust-converter system | Starting at $3.50/sq ft | Grinding, rust conversion and topcoat for older tin porch roofs and outbuildings with surface rust. |
| Seam and fastener re-seal add-on | Starting at $1.50/linear ft | Cleaning, re-fastening and sealing open seams and backed-out screws before coating goes down. |
| Complex or large-scale job | On estimate | Steep multi-level roofs, heavy pitting or commercial metal need an on-site look before a number is given. |
| Estimate | Free | Response within 24h at (513) 650-6986, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney re-flash | Starting at $600 | Covers one chimney counterflashing and step flashing rebuild on an accessible roof, with new bent metal and sealant joint. |
| Skylight curb re-flash | Starting at $750 | Includes removing failed curb flashing, rebuilding the pan and curb, and resetting the frame with proper laps. |
| Valley metal replacement | Starting at $900 | Covers cutting out corroded valley metal and installing new W-valley or open valley with correct overlap and underlayment. |
| Multi-joint or steep-pitch repair | On estimate | Needs an on-site look when the job involves steep pitch, tall chimneys, historic brick, or several joints at once. |
| Travel | Included | In Cincinnati and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (513) 650-6986, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snow guards over entries and walks | Starting at $1,200 | Covers a typical residential run of pad-style guards over the main drop zones, including sealing. |
| Bar or rail system | Starting at $1,800 | Continuous rails for long steep runs, priced by linear footage and roof access. |
| Snow fence for high-load roofs | On estimate | Heavy-duty fencing above driveways and lower roofs needs an on-site look at pitch and load. |
| Travel | Included | in Cincinnati and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (513) 650-6986, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing and attic-side inspection with photo documentation, no obligation to book repair. |
| Screw replacement and re-fastening | Starting at $250 | Loose or backed-out fasteners pulled and replaced with new washers; price moves with panel count and roof access. |
| Single panel replacement | Starting at $450 | One damaged panel cut out and replaced with matched profile and color; pitch and hillside access affect the rate. |
| Flashing rebuild at chimney or skylight | Starting at $650 | Full flashing rebuild and reseal at a penetration; cost rises with the number of penetrations and attic access. |
| Widespread storm damage repair | On estimate | Multiple panels, seams and flashing damaged across the roof; needs an on-site scope before a number is given. |
| Insurance claim documentation | Included | Photo record and written damage scope prepared for your adjuster at no separate charge. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard metal roof inspection | Free estimate | Walk-and-probe inspection with written report and photos, priced by roof size and pitch. |
| Pre-purchase inspection | Starting at $250 | Condition assessment and remaining life estimate, with more time for older or complex roofs. |
| Insurance documentation inspection | Starting at $300 | Storm and hail damage documented with photos and written report for your claim file. |
| Complex or steep-access roof | On estimate | Steep pitch, multiple valleys or limited access needs an on-site look before pricing. |
| Travel | Included | In Cincinnati and surrounding Hamilton County areas, no separate call-out fee. |
| Estimate | Free | Response within 24h at (513) 650-6986, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| 5-inch seamless K-style gutter | Starting at $9/linear ft | Includes on-site forming, hangers and standard outlets; run length and corner count move the price. |
| 6-inch seamless K-style gutter | Starting at $12/linear ft | Higher capacity for large standing seam roofs; roof area and outlet count drive the final figure. |
| Half-round seamless gutter | Starting at $14/linear ft | Traditional profile for older homes; material choice and historic district requirements affect cost. |
| Leaf guards and debris screens | Starting at $4/linear ft | Screened or micro-mesh covers; tree species overhead and roof pitch affect the layout. |
| Fascia repair and hanger reinforcement | On estimate | Rotted fascia or weak rafter tails need an on-site look before we quote the repair. |
| Travel | Included | In Cincinnati and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (513) 650-6986, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written scope | Free estimate | On-site walk of the building, panel and fastener check, written scope with no obligation to book |
| Screw replacement and re-fastening | Starting at $450 | Rusted or backed-out screws replaced, closures reset and sealant renewed on accessible roof areas |
| Barn or workshop re-roof | Starting at $4,500 | Exposed-fastener panel install over prepared purlins, price moves with square footage and access |
| Light commercial standing seam | On estimate | Concealed-fastener system priced after deck, slope and penetration review on site |
| Travel | Included | In Cincinnati and surrounding Tri-State counties, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (513) 650-6986, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Cincinnati need a crew that understands steep hillside pitches, heavy tree cover, and the freeze-thaw cycles that work on every seam and fastener. Cincinnati Metal Roofing is your local source for Metal Roof Installation, replacement, re-roof, and repair on homes across the city and surrounding areas. From the historic brick row houses of Over-the-Rhine and Mount Adams to the post-war ranches of Westwood and the newer subdivisions in Anderson and Mason, we match the system to the structure and the site.
Our network of licensed, bonded, and insured local contractors serves Cincinnati, Norwood, Blue Ash, Montgomery, Madeira, and the surrounding communities. We know the aging screw-down roof stock on 15 to 30 year old homes, the high-elevation exposure on the city's seven hills, and the way sugar maples and oaks drop limbs and leaves that stress flashing and gutters. Call (513) 650-6986 to schedule a free estimate or roof inspection.
Metal roofs fail for a handful of predictable reasons, and most leaks trace back to fasteners. On exposed-fastener roofs, the EPDM sealing washer under each screw dries, shrinks, and backs out over 15 to 30 years, opening a path for water at every fastener. Seam separation from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys are the next most common culprits. Wind-lifted panels after a severe thunderstorm and punctures from fallen limbs round out the list. Ignoring these issues lets water track along purlins and decking far from the entry point, rotting sheathing and saturating insulation before a stain appears on your ceiling.
The honest call between repair and replacement depends on the system and its condition. A full Screw Replacement & Re-Fastening often restores a watertight roof for a fraction of replacement cost when the panels and washers are otherwise sound. When seams are failing across the field or the deck is compromised, replacement is the better long-term investment. We explain both paths plainly, with no pressure and no storm-chaser tactics.
For active leaks, call (513) 650-6986 and we will trace the source, document the damage, and give you a straight recommendation. Our Metal Roof Leak Repair team handles flashing, boots, and seam issues, while our free estimate process covers the full repair-versus-replace conversation.
We install the full range of metal systems: Standing Seam Metal Roofing with concealed clips and no exposed fasteners, Corrugated & Ribbed Panel Roofing as the economical workhorse for cabins, barns, and workshops, Metal Shingle Roofing and Stone-Coated Steel Roofing for a traditional look, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison is simple: standing seam costs more upfront but has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. We also offer Metal Roof Over Shingles (Retrofit) when the deck is sound and tear-off when it is not, so you get the right system for your home rather than the most expensive one.
Metal roof installations are typically quoted per square foot, while repairs are often flat-rate. Pricing depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Final pricing depends on the roof and site conditions, so we provide a written estimate after inspecting the property. Some carriers may offer premium discounts for metal or impact-rated roofs, though coverage and discounts are always at the carrier's discretion.
For a clearer picture of typical ranges, visit our pricing page, then request a free estimate or free roof inspection to get numbers specific to your home.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We never suggest that a deductible could be waived, absorbed, or paid by the contractor, and we do not use "free roof" or "no cost to you" framing.
On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, always verify with the Cincinnati building or planning department before starting your project. Contact us with questions about documentation or scheduling.
Ready to get started? Cincinnati Metal Roofing serves in Cincinnati and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Cincinnati · Response within 24h · No commitment · ☎ (513) 650-6986
Your Free Quote Request